Places a ruled surface as a bevel between two surface edges.
Steps:
-
Select the first surface.
-
Click the surface at the side you want to keep after chamfering. Component surfaces will be selected and unjoined from their polysurfaces.
The first chamfer distance is the distance from the location where the two surfaces would intersect to the chamfer point on the first surface. The second chamfer distance is the distance from the location where the two surfaces would intersect if extended to the chamfer point on the second surface.
-
Select the second surface.
-
Click the surface at the side you want to keep after chamfering.
Options
Distances
The distance from the intersection of the surfaces to the edge of the chamfer.
Extend
Extends the chamfer surface as far as it can along surface.
Trim
Yes
Trims the original surfaces back to their intersections with the chamfer surface.
No
Do not trim.
Split
Split the original surfaces at the chamfer edges.
Surface Tools > Chamfer Surface
Surface > Chamfer Surfaces Related topics… |
Creates a chamfer surface between surface edges with varying distance values, trims the original surfaces faces, and joins the resulting surfaces.
Steps:
-
Select
the surfaces.
-
Type the chamfer distance.
-
Pick
a distance location.
Options
ChamferDistance
Specifies the distance for the current handle.
AddHandle
Adds a handle along the edges.
CopyHandle
Adds a new handle using the distance from the selected handle.
SetAll
Set the distance for all handles.
LinkHandles
If Yes, editing a single handle will update all handles.
RemoveHandle
Visible only when at least one handle has been added.
Notes:
-
Only added handles can be removed.
-
The default handles at the ends of each open edge segment cannot be moved or deleted. This is the minimum information the command needs in order to work.
-
The handle at the end of a single closed edge can be moved but not deleted.
RailType
Selects between three rail type options.
TrimAndJoin
If Yes, the surfaces are trimmed and joined to the blend.
Preview
Preview the surface.
Surface Tools > Variable Radius Surface Chamfer
Surface > Variable Fillet/Blend/Chamfer > Variable Chamfer Surfaces Related topics… |
Creates a ruled surface between multiple polysurface edges with varying chamfer distances, trims the original faces, and joins the chamfer surfaces to them.
Steps:
-
Select edges.
-
Select a handle.
Options
CurrentChamferDistance
Specifies the distance for the current handle.
AddHandle
Adds a handle along the edges.
CopyHandle
Adds a new handle using the chamfer distance from the selected handle.
SetAll
Set the chamfer distance for all handles.
LinkHandles
If Yes, editing a single handle will update all handles.
RemoveHandle
Visible only when at least one handle has been added.
Notes:
-
Only added handles can be removed.
-
The default handles at the ends of each open edge segment cannot be moved or deleted. This is the minimum information the command needs in order to work.
-
The handle at the end of a single closed edge can be moved but not deleted.
RailType
Selects between three rail type options.
Preview
Preview the surface.
Solid Tools > Variable Radius Chamfer
Solid > Fillet Edge > Chamfer Edge Related topics… |