NetworkSrf

Creates a surface from a network of curves.

Steps:

  • Select

    curves.

  • Note: All curves in one direction have to cross all curves in the other direction and cannot cross each other.

Options

NoAutoSort

Turns off automatic sorting so you can select the curves manually.

Tolerances

Edge Curves

Sets the tolerance for the edge curves. The edges of the surface will be within this value from the edge curves. The default is the system tolerance
.

Interior Curves

Sets the tolerance for the interior curves. The interior of the curve’s surface will be within this value. The default is the system tolerance
x 10.

If the curves themselves are farther apart from each other than the tolerance values, the best guess is made at the surface.

Angle

If the edge curves are surface edges, and you want the surface matching the adjacent surfaces with tangency or curvature continuity, this is the accuracy used to match the surface normals
.

Edge Matching

Determines how the edges match the input geometry.

Loose

The surface will match to the input edge curves with less accuracy.

Position

Tangency

Curvature

-NetworkSrf

Rhinoceros HistoryEnabledCommand From curve network

History enabled…

Changing the input objects changes the output objects.

Rhinoceros networksrf From curve network

Surface > Surface from Network of Curves

Rhinoceros Menu2 From curve network

Surface > Curve Network

Rhinoceros Gray Book Open From curve network Related topics…

From curve network